BKBVY - X-232,HYDRAULIC OIL

  • MSDS: BKBVY
  • Manufacturer: STANDARD OIL CO OF OHIO
  • Product Name: X-232,HYDRAULIC OIL
  • National Stock Number: 9150-00-162-8385
Product Identification

Product ID:X-232,HYDRAULIC OIL
MSDS Date:04/01/1986
FSC:9150
NIIN:00-162-8385
MSDS Number: BKBVY

Responsible Party
STANDARD OIL CO OF OHIO
200 PUBLIC SQ
CLEVELAND, OH 44114-2375
US

Emergency Phone: 800-321-8642/800-362-8059(OHIO)

Info Phone: 800-321-8642/216-586-8024

Preparer: R. K. RIGNEY

Cage: 82250

Contractor
HYDRONIC CORP (313-477-2288)
CLEVELAND, OH 44114-2375 US

Telephone: 216-586-8023

Cage: 12017

Ingredients

KEROSENE (ALIPHATIC PETROLEUM SOLVENT)

CAS: 8008-20-6

RTECS: OA5500000

Fraction By Weight: 80-90%


PETROLEUM OIL (DISTILLATE (PETROLEUM) SOLVENT REFINED LIGHT

CAS: 64741-89-5

RTECS: PY8041500

Fraction By Weight: 10-20%


MIXTURE OF PETROLEUM HYDROCARBON AND SELECTED ADDITIVES

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION TO SKIN,
EYES, AND RESPIRATORY TRACT. INGESTION: MAY LEAD TO VOMITING,
NAUSEA, HEADACHE, DIARRHEA. CHRONIC: REPEATED AND PROLONGED SKIN
CONTACT MAY CAUSE DERMATITIS.
Explanation of Carcinogenicity:THE COMPONENTS OF THIS PRODUCT HAVE NOT
SHOWN ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:INHALATION:OVEREXPOSURE MAY LEAD TO RESPIRATORY
IRRITATION. INGESTION:MAY CAUSE NAUSEA,VOMITING,AND DIARRHEA AND
POSSIBLY UNCONSCIOUSNESS. EYES:CAUSES MILD IRRITATION.VAPORS MAY
CAUSE TEARS/IRRITATION . SKIN:COMPONENTS ARE UNLIKELY TO BE
ABSORBED THROUGH SKIN IN HARMFUL CONCENTRATION BUT MAY CAUSE
IRRITATION.
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDER SHOULD USE CAUTION WHEN HANDLING OR USING THIS PRODUCT.

First Aid

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHALATION: REMOVE TO
FRESH AIR & RESTORE BREATHING IF NECESSARY. GET MEDICAL ATTENTION.
EYE : IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. INGESTION: GET IMMEDIATE
MEDICAL ATTENTION. DO NOT INDUCE VOMITING. NOTHING BY MOUTH IF
UNCONSCIOUS.

Fire Fighting

Flash Point Method:TCC
Flash Point:140F,60C
Lower Limits:0.7
Upper Limits:5.0
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS.RUNOFF TO SEWER MAY CAUSE FIRE OR
EXPLOSION HAZARD.CONTAINERS MAY EXPLODE IN HEAT.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES.USE PROTECTIVE GEARS.
SMALL SPILL:ABSORB WITH RAGS,CLAY AND PLACE IN CLOSED DOT DRUMS.
LARGE SPILL:CONTAIN BY DIKING WITH CLAY,VERMICULITE,OR SIMILAR
ABSORBENT MATERIAL.PUMP LI Q TO SALVAGE TANK.PLACE ABSORBED WASTE
IN DOT DRUM

Handling

Handling and Storage Precautions:STORE IN A COOL, VENTILATED WORK AREA.
KEEP CONTAINERS CLOSED WHEN NOT IN USE.AVOID PHYSICAL DAMAGE TO
CONTAINERS.AVOID SKIN AND CLOTHING CONTACT.
Other Precautions:THE SELECTION OF PERSONAL PROTECTIVE EQUIPMENT SHOULD
BE MADE BY THE MATERIAL USER BASED ON THE PARTICULAR CONDITIONS
WHERE THE MATERIAL IS TO BE USED TOGETHER WITH INFORMATION
CONTAINED IN THIS MSDS.

Exposure Controls

Respiratory Protection:NONE NORMALLY REQUIRED. IN CONFINED SPACES OR
WHEN NEEDED, USE NIOSH APPROVED RESPIRATOR. AIR-SUPPLIED OR
FILTERING TYPE WITH ORGANIC VAPOR CARTRIDGES ARE RECOMMENDED.
Ventilation:LOCAL AND MECHANICAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GOGGLES/GLASSES.
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:DO NOT TAKE INTERNALLY. AVOID SKIN CONTACT.
WASH SKIN AFTER USING PRODUCT. DO NOT EAT, DRINK OR SMOKE IN WORK
AREA.
Supplemental Safety and Health
NON-SPECIFICATION ITEM.PER DLSC-TIR,ITEM IS SOLE SOURCE UNDER
P/N:ENERGOL HLP-2,CAGE 8225(SOHIO); AND P/N:X-232,CAGE
12017,(HYDRONIC CORP). DURING 80'S HYDRONIC CORP SUPPLIED THE ITEM
BUT FURNISHED MS DS OF SOHIO'S PRODUCT ENERGOL HLP-2. THIS ENTRY IS
ACTUALLY OF ENERGO HLP-2 FOR X-232 UNDER HYDRONIC CORP.

Chemical Properties

HCC:F4
Boiling Pt:>310.C, 590.F
Vapor Pres:0.5MMHG
Vapor Density:>1 AIR=1
Spec Gravity:0.825
Viscosity:1.8-2.7 CST
Evaporation Rate & Reference:<1 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT YELLOW, CLEAR LIQUID WITH PETROLEUM OIL ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OTHER HYDROCARBON COMPOUNDS DURING COMBUSTION.

Disposal

Waste Disposal Methods:WASTE MAY BE BURNED IN AN APPROVED INCINERATOR
OR DISPOSED OF IN ACCORDANCE WITH ALL APPLICABLE LOCAL, STATE AND
FEDERAL LAWS AND REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.